Newfoundland Power Tools Expert Witnesses
Newfoundland Accident Reconstruction & Safety Expert Witness Listings
Although there are no experts who have listed "Power Tools" as their area of expertise from Newfoundland , the below listed expert witnesses have indicated they are available to assist in your selected state.
Expert Witnesses
List Your Qualifications by Clicking Here
Featured Experts
MORRIS FARKAS, Professional Safety Engineer, has 39 years of experience in construction, demolition, industrial and electrical safety, with the following credentials: Bachelor of Science Degree in Civil Engineering, Master of Science Degree in Safety,...
Learn More ›
Dr. Parhizkar is a distinguished expert witness renowned for her profound expertise in power grids and the oil and gas industry. With over 15 years of professional experience, Dr. Parhizkar has emerged as a leading authority in accident investigation,...
Learn More ›
Experienced mechanical engineer (MS, PE) with seven issued patents and multiple patents pending. Award-winning inventor. Vice President of Alpine Engineering and Design, a mechanical engineering consulting company with clients around the United States...
Learn More ›
Location:
Newfoundland
Areas of Expertise:
I have consulted in matters involving industrial and consumer products, industrial work practices, and premises liability since 1980. I've been retained on several hundred occasions by both Defense and...
Location:
Newfoundland
Areas of Expertise:
BUILDING & PREMISES EXPERT, Review and research to render opinions on correct building codes and life-safety standards concerning construction, ADA & OSHA issues. Opinions on causation & foreseeability,...
Location:
Newfoundland
Areas of Expertise:
Over 360 catastrophic injury and fatality cases, federal and state court, plaintiff and defense. Connecticut attorneys and law firms have voted Safety Priority one of "The Best" 9 times in annual surveys....
Location:
Newfoundland
Areas of Expertise:
Yarmus Engineering, P.C. has been providing Engineering services throughout the tri-state area since 1974. Andrew R. Yarmus, P.E., F.NSPE, President of the firm, has worked in various engineering and...
Location:
Newfoundland
Areas of Expertise:
Personal injury analyst. BA, MS, SM, PhD in physics & psychology (including MIT); 45 yrs R&D, teaching, trial testimony, industrial training, 'in the trenches'. Perception, vision, warnings, equipment/product...
Location:
Newfoundland
Areas of Expertise:
Mr. Hamilton, is a professional engineer and a full-time faculty member of the University of Arkansas. In this this faculty position he is responsible for teaching undergraduate mechanical engineering...
Location:
Newfoundland
Areas of Expertise:
I have been engaged in the design, development, marketing and troubleshooting aspects of electrical engineering since 1983, and in the more specialized practice of forensic engineering since 2002. During...
Location:
Newfoundland
Areas of Expertise:
Mr. Caldwell has 38 years experience in materials R&D, product design and testing, manufacturing process development, quality assurance and product failure for ferrous and non-ferrous alloy products. He...
Location:
Newfoundland
Areas of Expertise:
Mr. Pina has forty plus years of experience in safety, health, Personal protective equipment, PPE, and environmental management/loss prevention for construction, demolition, coal, chemical, steel, environmental...
Location:
Newfoundland
Areas of Expertise:
PhD Mechanical Engineering from UC Berkeley, MS Mechanics from Illinois Institute of Technology, BS Civil Engineering from Cooper Union. Licensed Professional Engineer (Safety) State of California.
Accident...
Location:
Newfoundland
Areas of Expertise:
Since 1988, Real-World Forensic Engineering, LLC (“RWFE”) has provided engineering services to industries and government labs, as well as litigation support to both plaintiff and defense attorneys practicing...
Location:
Newfoundland
Areas of Expertise:
Joe DeFranco has over 25 years of experience in construction, industrial and crane safety consulting. He has been a Board Certified Safety Professional since 2001 and has been retained in over 70 cases...
Location:
Newfoundland
Areas of Expertise:
Dr. Abraham has over forty years of international experience consulting to insurance companies, municipalities, government agencies, and the legal profession. He has consulted in more than 3,500 matters...
Location:
Newfoundland
Areas of Expertise:
Peter Petrovsky, PE, earned registrations as Professional Engineer in Civil Engineering, as well as, in Mechanical Engineering. Additionally, he earned licenses as a General Engineering Contractor, General...
Location:
Newfoundland
Areas of Expertise:
Keystone Engineering Consultants, Inc. is a multi-discipline, broad-spectrum firm providing comprehensive and qualified forensic engineering, architecture, scientific, biomechanics, and fire/arson investigation...
Location:
Newfoundland
Areas of Expertise:
Dennis Eckstine has over 30 years experience in engineering, quality, and product safety including company representative at trial for equipment manufacturers. He has expertise and extensive experience...
Location:
Multiple Locations
Areas of Expertise:
Robson Forensic is a national leader in expert witness consulting, providing technical expertise across many fields within engineering, architecture, science, and a broad range of specialty disciplines.
We...
Location:
Multiple Locations
Areas of Expertise:
During over 35 years of Forensic Engineering work Senior Forensic Engineer James D. Madden, P.E. has:
- completed over 1100 cases
- prepared and issued over 700 written reports
- prepared and issued...
Location:
Multiple Locations
Areas of Expertise:
Daryl L. Ebersole, PE, is a licensed Professional Engineer in more than 10 states. He has also testified at trial in approximately 10 states. He is a proven investigator of electrical causes of fires,...
Location:
Multiple Locations
Areas of Expertise:
Gregory H. Pestine, PE
Construction, Construction Safety, Quality Control / Assurance, and Civil Engineering Expert
Greg has nearly 30 years of experience in various roles in many types of construction...
Location:
Multiple Locations
Areas of Expertise:
Who is The Kilpatrick Group, PA?
Our mission is to provide to you with forensic mechanical design engineering services that are dedicated to the application of the art, science and methodology of forensic...
Location:
Multiple Locations
Areas of Expertise:
Kristopher J Seluga, M.S., P.E. (CT & NY)
Our staff of experienced engineers are ready to apply established scientific and engineering knowledge and techniques to your case. Our staff has published...
Location:
Multiple Locations
Areas of Expertise:
For over 30 years, ForensisGroup has provided the nation’s top law firms, businesses, insurance companies, government entities with highly qualified expert witnesses and consultants. Experts referred by...
Location:
Multiple Locations
Areas of Expertise:
($180ph review NY, NJ, MD, PA, DE, VA, DC, WV)
• Accident Reconstruction: Car, Bus, Truck, Pedestrian, Bicycle, Motorcycle, Rollovers
• Biomechanics,Occupant Injury
• Safety Standards, Falls
• Building...
Location:
Multiple Locations
Areas of Expertise:
Consolidated Consultants (CCc) continues to deliver high quality expert witness and medical expert witness referrals nationwide since 1995. CCc is the only referral service where you can view the full,...
Power Tools FAQs
What is a power tools expert witness?
A power tools expert witness is a person who can provide testimony about the proper use and operation of power tools.
What is the role of a power tools expert witness?
An expert witness in power tools plays a role in providing testimony on power tools and their use in legal matters.
How much can a person make as a power tools expert witness?
Power tools expert witnesses can make between $150-$400 per hour, and even more depending on their skills, knowledge, and experience.
What are the qualifications of a power tools expert witness?
A power tools expert witness should have qualifications in power tool design, safety protocols, and usage, as well as knowledge of industry standards and regulations.
What type of evidence is gathered in a legal proceeding by a power tools expert witness?
A power tools expert witness may gather evidence such as product specifications, testing results, and industry standards to provide testimony in a legal proceeding related to power tool accidents or defects.
In what type of cases might expert testimony be heard from a power tools expert witness?
Expert testimony from a power tools expert witness may be heard in cases involving product liability, workplace accidents, personal injury, and construction disputes related to the use of power tools.
Power Tools Expert Witnesses by State
All States,
Alaska, Alabama, Arkansas, Arizona, California, Colorado, Connecticut, District of Columbia, Delaware, Florida, Georgia, Hawaii, Iowa, Idaho, Illinois, Indiana, Kansas, Kentucky, Louisiana, Massachusetts, Maryland, Maine, Michigan, Minnesota, Missouri, Mississippi, Montana, North Carolina, North Dakota, Nebraska, New Hampshire, New Jersey, New Mexico, Nevada, New York, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Vermont, Washington, Wisconsin, West Virginia, Wyoming